| Technical Data Sheet | | Handi-Foam® | | 12-430 B2 Quick Cure & Slow Rise (disposable) | | 25-890 B2 Quick Cure & Slow Rise (refillable) | | 40-1420 B2 Quick Cure & Slow Rise (disposable) | | 125-4500 B2 Quick Cure & Slow Rise (refillable) | | 740-26400 B2 Quick Cure & Slow Rise (refillable) | | Handi-Foam® is a multiple purpose two-component polyurethane foam designed within | | the international guidelines for protection of the ozone layer, and with respect to the | | Montreal Protocol, 1987, and other environmental guidelines, utilizing a non-flammable | | blowing agent to assist in the safety of the end user. The pre-pressurized, portable two- | | component foam systems are dispensed through the state-of-the-art Handi-Gun® two- | | component dispensing gun, providing unsurpassed quality and flexibility in end-use | | performance. | | Application Areas | | Spray foam onto any clean, dry surface in any direction to insulate, fill and seal various | | size voids, dampen sound or reduce vibration. It is specifically designed to spray onto flat | | or irregular surfaces, and to fill large cavities. | | Properties | | The patented and user-friendly system provides many unique advantages, including: | | • Fire rated Foam | | • Easy to use | | • Quick Curing | | • Excellent Insulation properties | | • Wide range of Packaging sizes | | • Environmental friendly foam and packaging (Refillable) | | Handi-Foam fully expands and dries tack-free within seconds. It fully cures within | | several hours. | | Two-component foam systems expand with approximately an 8-to-1 ratio, and cure to a | | semi-rigid closed cell foam upon the chemical reaction of component A (a polymeric | | isocyanate) with component B (a polyol blend containing certain additives). | | Handi-Foam adheres to almost all building materials with the exception of surfaces such | | as polyethylene, Teflon®, silicone, oils and greases, mold release agents, and similar | | materials. | | Optimal application temperature is 24°C (75°F) but may be sprayed onto colder or | | warmer substrates, with slight effects on the foam characteristics. Cured foam is resistant | | to heat and cold, -129°C to +93°C (-200°F to +200°F), and to aging, but not UV rays | | unless painted, covered or coated. Cured foam is also chemically inert and non-reactive | | in approved applications. |
| Handi-Foam systems require no outside mechanical or electrical power source and are | | disposable. Handi-Foam is available in various kit sizes to meet specific job application | | requirements. When sprayed, the foam will create a seamless, continuous seal to insulate | | and protect against dust, air infiltration, pests, etc. | | Preparation For Use | | Substrate must be clean, dry, firm, free of loose particles and free of dust, grease and | | mold release agents. Protect surfaces not to be foamed. | | Shake kits before using. | | Application / Use | | After following instructions for set-up, kits are ready to use. Valves must be in the | | upright position for Handy Foam System 25, 40, 125 and 740 and pointed down for | | Handy Foam System 12. Materials are dispensed through hoses and mixed in the | | disposable nozzle. | | With a nozzle attached to the two-component gun, dispense foam by squeezing the | | trigger of the gun. To interrupt or stop foaming process, release the gun trigger. Once | | foaming process has stopped, the gun must be reactivated within one minute or a new | | nozzle must be installed. Fresh foam may be applied in several stages to reduce | | overfilling of void or damage to non-rigid, confined cavities. Cured foam can only be | | removed mechanically. | | Important Note: Use only in well ventilated area or with certified respiratory protection. | | Wear gloves, eye protection and protective clothing when using. Read all instructions and | | safety information | (MSDS) prior to use of any product. The product contains no | | formaldehyde. Cured foam is non-toxic. KEEP OUT OF REACH OF CHILDREN. | | Product Storage | | Store in cool dry area. Do not expose to open flame or temperatures above 49°C (120°F). | | Excessive heat can cause premature aging of components resulting in a shorter shelf life. | | Handi-Foam is reusable by following product instructions. |
| Technical Data | | Quick Cure | Slow Rise | | Density (free rise) | 28 kg/m3 | 28 kg/m3 | | ASTM D-1622 | | Lambda | | | | 0,022 W/m.K | 0,024 W/m.K | | ASTM D-1623 | | R-Factor | | 6-7/inch | 6/inch | | Tensil strength | | | | 317 kPa | 286 kPa | | ASTM D-1623 | Parallel | | Compressive strength | | ASTM D-1621 | | Parallel @ 10 % | 158 kPa | 95 kPa | | Perpendicular @ 10 % | 110kPa | 101 kPa | | Shear strength | | ASTM C-273 | | Parallel | 141 kPa | | Perpendicular | 128 kPa | | Dimensional stability | | ASTM D-2126 | | Heat age (93°C) | -0.6% | +4,5% | | Humid age (70°C) | +2,9% | +1,0% | | Cold age (-40°C) | -0,3% | -0,3% | | Closed cells | >90% | 92% | | ASTM D-2856 | | Moisture vapor transmission | 4,7% | 4,9% | | Tack-free/expansion time | 30 sec/ 60 sec | 60 sec/ 90 sec | | Cuttable | 3 min | 5 min | | Fire rating | B2 | B2 | | DIN 4102-1 |
| Handi-Foam package is patented under U.S. patent #6,182,868. | | Dispensing gun is patented under U.S. patent #6,345,776. Other foreign and domestic | | patents pending. | | ODP (Ozone Depletion Potential): Contains non-ozone depleting, non-flammable HFC | | Propellant. | | Theoretical Yield* | | Product | Quick Cure 28 kg/m3 | Slow Rise 28 kg/m3 | | HF 12-430 | 430 liter | 430 liter | | HF 25-890 | 890 liter | 890 liter | | HF 40-1420 | 1420 liter | 1420 liter | | HF 125-4500 | 4500 liter | 4500 liter | | HF 740-26400 | 26400 liter | 26400 liter | | *Yields are based on theoretical calculations, for comparison purposes, and will vary | | depending on ambient conditions and particular application. Model number generally | | reflects board feet volume in each kit. | | Gasco, a dvision of Mebrom nv - Assenedestraat 4 - 9940 Rieme-Ertvelde - Belgium |
|
Technical
