Technical Data Sheet

Technical Data Sheet Handi-Foam® 12-430 B2 Quick Cure & Slow Rise (disposable) 25-890 B2 Quick Cure & Slow Rise (refillable) 40-1420 B2 Quick Cure & Slow Rise (disposable) 125-4500 B2 Quick Cure & Slow Rise (refillable) 740-26400 B2 Quick Cure & Slow Rise (refillable) Handi-Foam® is a multiple purpose two-component polyurethane foam designed within the international guidelines for protection of the ozone layer, and with respect to the Montreal Protocol, 1987, and other environmental guidelines, utilizing a non-flammable blowing agent to assist in the safety of the end user. The pre-pressurized, portable two- component foam systems are dispensed through the state-of-the-art Handi-Gun® two- component dispensing gun, providing unsurpassed quality and flexibility in end-use performance. Application Areas Spray foam onto any clean, dry surface in any direction to insulate, fill and seal various size voids, dampen sound or reduce vibration. It is specifically designed to spray onto flat or irregular surfaces, and to fill large cavities. Properties The patented and user-friendly system provides many unique advantages, including: • Fire rated Foam • Easy to use • Quick Curing • Excellent Insulation properties • Wide range of Packaging sizes • Environmental friendly foam and packaging (Refillable) Handi-Foam fully expands and dries tack-free within seconds. It fully cures within several hours. Two-component foam systems expand with approximately an 8-to-1 ratio, and cure to a semi-rigid closed cell foam upon the chemical reaction of component A (a polymeric isocyanate) with component B (a polyol blend containing certain additives). Handi-Foam adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon®, silicone, oils and greases, mold release agents, and similar materials. Optimal application temperature is 24°C (75°F) but may be sprayed onto colder or warmer substrates, with slight effects on the foam characteristics. Cured foam is resistant to heat and cold, -129°C to +93°C (-200°F to +200°F), and to aging, but not UV rays unless painted, covered or coated. Cured foam is also chemically inert and non-reactive in approved applications. Handi-Foam systems require no outside mechanical or electrical power source and are disposable. Handi-Foam is available in various kit sizes to meet specific job application requirements. When sprayed, the foam will create a seamless, continuous seal to insulate and protect against dust, air infiltration, pests, etc. Preparation For Use Substrate must be clean, dry, firm, free of loose particles and free of dust, grease and mold release agents. Protect surfaces not to be foamed. Shake kits before using. Application / Use After following instructions for set-up, kits are ready to use. Valves must be in the upright position for Handy Foam System 25, 40, 125 and 740 and pointed down for Handy Foam System 12. Materials are dispensed through hoses and mixed in the disposable nozzle. With a nozzle attached to the two-component gun, dispense foam by squeezing the trigger of the gun. To interrupt or stop foaming process, release the gun trigger. Once foaming process has stopped, the gun must be reactivated within one minute or a new nozzle must be installed. Fresh foam may be applied in several stages to reduce overfilling of void or damage to non-rigid, confined cavities. Cured foam can only be removed mechanically. Important Note: Use only in well ventilated area or with certified respiratory protection. Wear gloves, eye protection and protective clothing when using. Read all instructions and safety information (MSDS) prior to use of any product. The product contains no formaldehyde. Cured foam is non-toxic. KEEP OUT OF REACH OF CHILDREN. Product Storage Store in cool dry area. Do not expose to open flame or temperatures above 49°C (120°F). Excessive heat can cause premature aging of components resulting in a shorter shelf life. Handi-Foam is reusable by following product instructions. Technical Data Quick Cure Slow Rise Density (free rise) 28 kg/m3 28 kg/m3 ASTM D-1622 Lambda     0,022 W/m.K 0,024 W/m.K ASTM D-1623 R-Factor   6-7/inch 6/inch Tensil strength     317 kPa 286 kPa ASTM D-1623 Parallel Compressive strength ASTM D-1621 Parallel @ 10 % 158 kPa 95 kPa Perpendicular @ 10 % 110kPa 101 kPa Shear strength ASTM C-273 Parallel 141 kPa Perpendicular 128 kPa Dimensional stability ASTM D-2126 Heat age (93°C) -0.6% +4,5% Humid age (70°C) +2,9% +1,0% Cold age (-40°C) -0,3% -0,3% Closed cells >90% 92% ASTM D-2856 Moisture vapor transmission 4,7% 4,9% Tack-free/expansion time 30 sec/ 60 sec 60 sec/ 90 sec Cuttable 3 min 5 min Fire rating B2 B2 DIN 4102-1 Handi-Foam package is patented under U.S. patent #6,182,868. Dispensing gun is patented under U.S. patent #6,345,776. Other foreign and domestic patents pending. ODP (Ozone Depletion Potential): Contains non-ozone depleting, non-flammable HFC Propellant. Theoretical Yield* Product Quick Cure 28 kg/m3 Slow Rise 28 kg/m3 HF 12-430 430 liter 430 liter HF 25-890 890 liter 890 liter HF 40-1420 1420 liter 1420 liter HF 125-4500 4500 liter 4500 liter HF 740-26400 26400 liter 26400 liter *Yields are based on theoretical calculations, for comparison purposes, and will vary depending on ambient conditions and particular application. Model number generally reflects board feet volume in each kit. Gasco, a dvision of Mebrom nv - Assenedestraat 4 - 9940 Rieme-Ertvelde - Belgium